Washer Not Draining Water? 8 Causes and Solutions

Home / Washer Not Draining Water? 8 Causes and Solutions

Does your washing machine not drain water adequately? Particularly when you find standing water in the drum and damp clothing, a washer that won’t drain may be annoying. With over 15 years of expertise in repairing washing machines in Dubai, Mr. Appliances Fixer has seen it all and is here to help you identify and promptly address any issues.

Whether you require a technician in Al Quoz, Al Qusais, or International City or are looking for washing machine repair close by, read on to discover the seven most often occurring causes your washer won’t drain—and how to remedy them.

Tips For Washer Not Draining Water

Debris, such as lint, coins, hair, and fabric fibers, can, over time, clog the drain pump or filter, preventing water from draining correctly.

Correction:

  • Invert the machine and unplug it.
  • Usually, behind a little panel at the bottom front, find the drain filter.
  • Open the filter, lay a cloth and a container beneath it, then clear any trash.
  • Properly clean the pump area.

Still not emptying. For washing machine repair in Al Qusais and its surrounding areas, schedule a prompt visit with our knowledgeable team.

Two possible causes for a clogged drain hose are kinked, bent, or foreign item residue.

  • Pull the machine forward and inspect for any obstructions or kinks in the hose.
  • To look for clogs, disconnect the hose and flow water through it.
  • Clearing it with a plumber’s snake or flush with water can help.
  • Our International City washing machine repair professionals are adept in quickly clearing hose clogs.
  • The cause of malfunctioning drain pumps might be damage or failure of the pump motor.

Solution: If the pump grinds or fails to turn on, it may require replacement. One should leave this work to a qualified specialist. 

Consult our qualified experts for washing machine repair in Dubai and have the pump replaced with original components. 

Broken Lid Switch (for Top Load Washers)

Cause: Should the lid switch be defective or not engaging correctly, the washers will not spin or drain.

Resolution:

  • See if the machine notes closed lids.
  • Closing the lid should cause a clicking sound.
  • Should the switch fail, it may need to be replaced.
  • Ask for aid. For the repair of washing machines nearby in Dubai, we are your first choice.
  1. Some older or top-load washers spin and drain using belts that are either worn through or damaged. Should the belt break or fade, the washers won’t run as they should.
  2. To inspect the belt for wear, open the rear panel. We advise consulting a specialist, as replacing it requires technical knowledge.
  3. Including LG washing machine repair in Dubai, we provide consistent service for all leading brands.
  4. Should the drain line be positioned either too high or too low, the draining process may suffer, and water might back up.
  5. The drain pipe should be kept no higher than 90–100 cm above the floor. Reinstall it according to the user handbook for proper operation.
  6. Modern washing machines may depend on sensors and a control board, so there are electronic control or sensor problems. If they are defective, your washer may not initiate the drain cycle.
  7. Try disconnecting the washer for ten minutes to try resetting them. Should the issue continue, the control board or pressure switch might require examination.
  8. This is a complex problem; contact us for professional washing machine repair either throughout Dubai, Al Quoz, Al Qusais or elsewhere.

Plan Your Washing Machine Repair in Dubai Today!

Don’t wait if you still find yourself surrounded by a water-filled washer. Let our qualified professionals effectively and reasonably repair your washing machine for you. 

Washing Machine Repair Services
Scroll to Top
Call Now